Aquafog 700, Greenhouse Foggers, Misters from Advance Greenhouses

All Aquafog 700 units are compact, lightweight (10 - 17 pounds depending on the model), and highly corrosion resistant due to the advanced design made of thermo-plastic and other materials. They are engineered to withstand humid conditions as high as 100% relative humidity. Units are constructed of impenetrable components like Nema 4 boxes and connections, all 304 stainless steel hardware, UV stabilized polyethylene housing and precision, high strength injection molded polypropylene components. It is now available in three different models. A quick comparison chart of the features of each model follows below.

The Aquafog 700 is dependable, easy to install (simply attach to a garden hose and standard wall outlet) and low cost. They are excellent for humidity and cooling applications. Quiet operation (noise at 10' distance is 64db) is another of the most desirable features. The units fill automatically and have an adjustable fogging output control. They have a capability of up to 3 GPH, producing particles that average 35 microns in size. The fans are nozzle - free and can atomize ordinary water supplies into a very fine mist like fog. Utilizing high-speed centrifugal force and air flow, these units can propel a misty-fog stream up to 20 feet away. They can accept ordinary water supplies, even well or pond water without the risk of clogging. The self- flushing atomization system forces liquids through passageways in the fan blades and creates the fog as the liquid exits the blades. High pressure lines are not required. Delivered fully assembled, ready to operate.

Aquafog 700 Direct Feed

$499.00 including shipping to Continental US

Add to Cart

Aquafog 700 Direct Feed Flowmeter

Flowmeter Panel

Receive liquid directly through a visual flowmeter control panel
Fine "repeatable" control of fogging output
Enhanced dependability by eliminating sump
Well suited for harsher environments or applications where standing water in a sump could become an issue
Equipped with a 5 GPH (20-300cc/min) flowmeter panel
12' condensation drainage line

For more information and accessories for this unit, click here

Aquafog 700 Bench Top

$579.00 including shipping to Continental US

Add to Cart

Conveniently sits on flat surfaces or shelves
Extremely easy to set up and operate
Reuses condensation waste water, eliminating need for a near by drain
Fills automatically by means of an internal float valve
Comes equipped with a simple garden hose connection
Quarter-turn valve controls the fogging output

For more information and accessories for this unit, click here

Aquafog 700 Hanging Sump

$599.00 including shipping to Continental US

Add to Cart

Essentially a Bench Top unit with an extra bracket for hanging

For more information and accessories for this unit, click here

Click on Pictures for larger view

Quick Reference Comparison Chart

Feature	Direct Feed	Bench Top	Hanging Sump
Most economically priced fogging unit	*
More economically priced automatic control packages		*	*
Supplied with a visual read, water flowmeter panel with fine adjustment capability	*
Does not require a support bar for installation		*
No drainage area needed, unit reuses the housing's condensation waste water		*	*
Comes with convenient on/off power switch and quarter turn water control valve		*	*
Most reliable unit because of fewer moving components (no pump or float valve)	*
Also works well with low pressure RO (reverse osmosis) type water supplies		*	*

Stands are constructed of durable thick-wall, polyethylene plastic with a structurally reinforced post and fillable base for maximum stability. Five pre-set height locations, at 7" intervals, allow for easy height adjustments without the need for tools. Quick, easy assembly. Available in black.
Height: 78.5" (199.4 cm) Width: 33.5" (85.1cm) Depth: 29.5" (74.9cm) You must drill a 5/16" hole in the arm to use this stand with the Aquafog 700.

An economical stand that also ads mobility to your Fan. Can accommodate Stationary or Oscillating setups. These Floor stands are equipped with 10” semi-pneumatic wheels, a durable frame construction and a fully adjustable boom allowing for quick height adjustment. Can be easily dollied from place to place. Stands arrive pre-cut, pre-drilled and are quick to assemble. You must drill a 5/16" hole in the arm to use this stand with the Aquafog 700.The boom is adjustable to 6'8" with a 35" footprint for clearance through doorways. Packaged for courier (UPS) deliveries.