Greenhouse lighting Controllers and Timers from Advance Greenhouses

This heavy-duty (20 amp) inline timer can be used with the new
Sun System 1, Sun Sysytem 6 & Gro Pro™ ballasts with the MVP™ configuration.
The timer is positioned “inline” on the power cord. Customers
love this timer for it’s ease of use & excellent reliability.

HLC-1 HIGH TEMPERATURE SHUT-DOWN
Rated for 15 amps @ 120 volts.
The HLC-1 is used as a high temperature shutdown by plugging your lights into the outlet and setting the maximum temperature that your growing environment can sustain. If this setting is exceeded, your lights will turn off. This is cheap insurance for your garden. The HLC-1 can also be used as a heating thermostat. Connect your heating equipment to the heating outlet, and then set the temperature that you wish to maintain. If the temperature falls below your setting, the heating outlet is activated. Comes with a 3' remote temperature sensor.

HLC-2 15 MINUTE ON DELAY LIGHT CONTROL
Rated for 15 amps @ 120 volts.
The HLC-2 is designed to protect your expensive HID lights from "Hot Starts." A hot start occurs whenever your lights are turned OFF and then back ON before the lamp is allowed to cool off. Hot starts caused by power outages reduce your lamp's life and intensity. When the HLC-2 is connected to your lights, it will sense a power interruption and start a 15 minute time delay to keep the lights from trying to re-fire during the cool down period. The HLC-2 can also be used to delay other devices from starting for 15 minutes when power is applied.

HLC-3 HIGH TEMPERATURE SHUT-DOWN w/15 MINUTE ON DELAY
Rated for 15 amps @ 120 volts.
The HLC-3 HID lighting controller combines the functions of the HLC-1 and HLC-2 to protect your expensive HID lights from hot starts and your garden from high temperatures. A high temperature shutdown provides insurance from crop damage due to high heat from ventilation and cooling problems. When connected to your lights, it will monitor your growing area's temperature and disable your lights if the maximum temperature you specify is exceeded. The HLC-3 will also sense a power interruption and start a 15 minute time delay to keep your lights from trying to re-fire during
the cool down period. Comes with a 3' remote temperature sensor.

Rated at 15 amps @ 120 volts.
The UPM-1 Universal Power Module is a unique device that can allow the user to run additional HID lights or control multiple fans/air conditioners or other high amperage 120 volt equipment. The UPM-1's "plug-box" is designed to be plugged into a standard household outlet. The 16 foot "trigger cable" coming from the UPM-1 is then connected to your control device such as a time clock, thermostat or environmental controller. When the control device applies power to the "trigger cable", the relay inside the UPM-1 applies power to the twin outlets on the front of the UPM-1.

Product #	Description	Price
702075	UPM-1 Universal Power Module	$99.95 Add to Cart

HPR-1 High Power Relay

HPR-1 HIGH POWER RELAY

Rated at 30 amps @ 240 volts.
The HPR-1 is a hard-wired 30 amp capacity, 240 volt version of the UPM-1. The HPR-1 is perfect for controlling higher loads such as large air conditioners or multiple HID ballasts. You supply 240 volt power to the input side of the HPR-1. The air conditioner or ballasts to be controlled are then hard-wired into the output side of the relay. The 16 foot "trigger cable" coming from the HPR-1 is then connected to your control device such as a time clock, thermostat or environmental controller. When the device applies power to the "trigger cable", the relay in the HPR-1 applies power to the connected equipment.

Product #	Description	Price
702080	HPR-1 High Power Relay	$179.95 Add to Cart

4 Light Timer - 120 Volts Model LT4-120

These time switches are designed to operate high load lighting equipment. They consist of a premium quality precision synchronous clock motor and a high amperage switching circuit. These controllers are housed in black anodized brush finish aluminum enclosures
which will not break, chip or corrode. Operates with a maximum combined outlet switching capacity of 40 amps. Plug or wire the power cord into a receptacle capable of handling the maximum total combined amperage draw of your equipment load. Plug lighting equipment into outlet receptacles located on each side of controller. Timer has 96 non-detachable 15 minute on\off trippers. The LT4-120 provides four 10 amp outlets, while the LT4-240 offers four 5 amp outlets. Both timers are capable of controlling up to four 1000 watt lights each. The LT8-240 provides eight 5 amp 240 volt outlet receptacles, each capable of powering up to 1000 watts of lighting equipment.

Product #	Description	Price
702390	LT 4 120 4 Light Timer 120 volt	$300.00 Add to Cart
702395	LT 4 240 4 Light Timer 240 volt	$350.00 Add to Cart
703400	LT 8 240 8 Light Timer 240 volt	$395.00 Add to Cart

24 HR. Timestat Controllers Model TSC-1

The TSC-1 timer is a 24 hr. time switch that provides accurate timing with 96 non detachable trippers for On/Off functions adjustable in 15 Min. increments up to 48 cycles per day. Easy to set and operate. Constructed with durable, black anodized, aluminum housings that will never corrode or discolor for hot, cold or humid environments. This unit can be used independently or as part of a combination of control devices to coordinate numerous system functions. Precision synchronous clock motor provides 15 amp 110V control for pumps, fans, lighting, solenoids, motors, relays or virtually any equipment or appliance dependent upon multiple daily operations.

Product #	Description	Price
703405	24 Hour Timestat Controller TSC-1	$155.00 Add to Cart

High Amperage Relay Model HAR-1

This power relay uses high amperage capacity contacts to transfer power to large
fans, pumps or lighting systems requiring high voltage or amperage service. Prevents
premature failure of equipment, timers or other switching controls due to excessive
current draw. Allows switching of 240 V AC equipment with 115 V AC controls. Prevents
equipment overheating due to insufficient power supply. Use the HAR-1 to operate 115
or 240 volt high draw equipment. Provides 30 amp switching capacity with 115 V AC
trigger input from control device. Approved for indoor use only.

Product #	Description	Price
703410	HAR-1 High Amperage Relay	$220.00 Add to Cart