Join the conversation
I am proud to have been named a Diamond Author by Ezines
Greenhouses at a Glance-A side by side comparison of our greenhouses
Greenhouses and Greenhouse Kits in Alphabetical Order
Accessories for Greenhouses in Alphabetical Order
Greenhouses are perfect for over wintering plants
Polygal Polycarbonate Sheets | Polygal Polycarbonate Panels
As of May 1, 2011, we will be implementing a small order charge. Any order between $500.00 and $750.00 worth of polycarbonate sheets will be charged a $25.00 small order charge.Minimum Polycarbonate Order - $500.00 worth of polycarbonate sheets. This does not include U's, H's, screws, crating or shipping. This ships Common carrier. Please note, we do not order power lift gates and will not authorize the freight companies to give you this service. If you desire a power lift gate you must pay the additional charges. They are anywhere from $75.00 to $150.00.
How to figure the price per sheet. Take the width of the sheet, multiply it by the length of the sheet and multiply by the cost per square foot for the material you are interested in. For example - clear 8mm twinwall, one sheet 4' x 8'
4' x 8' = 32 square feet x $1.57 per square foot = $50.24 per sheet, plus crating and shipping.
The sheets are available in 4' and 6' widths. They are available in whole foot increments from 6' to 24'. Some sheets may be available in longer lengths.
**rib spacing may vary dependent on the manufacturer
***This is a factory applied condensation control which causes water to spread into a thin sheet rather than form into droplets. This built-in condensation control eliminates condensation drop formation, while retaining its high level of transparency.
To visit Polygal's website, click here
For more complete specifications on Polygal polycarbonate including R value, U value, Shading coefficient, solar heat gain coefficient and solar reflection, click here
For an installation guide using regular H's, click here
For an installation guide using snap H's, click here
To view these manuals you must have Adobe Reader. You can download it free by clicking the icon below.
Minimum Polycarbonate Order - $500.00 worth of polycarbonate sheets. This does not include U's, H's, screws, crating or shipping.
Profiles for the Polycarbonate sheets are available in polycarbonate and some in aluminum. Shipping is not included in these prices. Please contact us for a shipping quote. Please note: We will not accept orders for profiles only. They will only be shipped with polycarbonate sheets.
#420 #9 x 1.0" Wood Screws $29.61 does not include washers
#421 #9 x 1.5" Wood Screws $29.61 does not include washers
#411 #12 x 1.0" SDST Screws $35.01 does not include washers
#413 #12 x 1.5" SDST Screws $37.71 does not include washers
#410 #12 x 2.0" SDST Screws $40.39 does not include washers
#425 #12 3/4" Stainless Steel $42.78 does not include washers
#426 #12 1" Stainless Steel Screw $42.78 does not include washers
#427 #12 1 3/8" Stainless Steel $42.78 does not include washers
#472 1" Alum. Washer w/gasket $29.61
#473 1" Bubble Washer $35.01
#505 1" Spacer $18.85
#508 1" Foil Vent Tape - 108'/roll $42.05
#509 1.5" Foil Vent Tape - 108'/roll $47.80
#510 2" Foil Vent Tape - 108'/roll $65.49
#511 2.5" Foil Vent Tape - 108'/roll $89.73