Polycarbonate Lean To Greenhouse

Evangeline Lean-To Greenhouses are built to be attached to your home or shed. Attached greenhouses have many benefits to freestanding greenhouses. Your water and heat supply sources are readily available. Plus, you have the luxury of walking out of your house directly into your very own greenhouse. This makes it very convenient if you are looking for fresh veggies for your meal. Not to mention if you have the correct exposure, you will gain heat from the wall of your home.

Features of Evangeline Lean-To Greenhouses

The Evangeline lean-to has an aluminum frame and is glazed with 6mm twinwall polycarbonate or 5 wall 16mm polycarbonate (straight eave only). It is available in curved eave or straight eave at the same price. These are just a few representative sizes for the Evangeline Lean-To Greenhouses. It can be added on to in approximately 2′ increments on the projection and length. This greenhouse is available with up to a 20′ 6 3/8″ projection. The length is available to 51′ 3 1/4″.  For lower ranch style homes, we are able to offer our lower roof pitch. Aluminum frames have a white, green or brown baked on enamel. For more specifications on this greenhouse see our Evangeline page. Please specify in customer comments which gable end you want the door to be on. Also, please let us know which side you want the door to be hinged on. Both of these are determined facing the greenhouse from the outside. Also, please let us know the height of your kneewall if you are building one. We will supply you with a foundation sketch after we receive your order. These greenhouses are custom built to your specifications upon order. They will take approximately 3 – 4 weeks (sometimes longer during busy seasons) to be built. This greenhouse is rated for 32 psf snow load and 85 mph wind load. There are many different sizes available for the Evangeline Lean To Greenhouses. If you do not see the size you want below, please contact us.

Do you have a limited attaching height, but do not like the look of the lower roof pitch? Or, you really need the extra height in your greenhouse? We have another option. We can attach the greenhouse to your fascia board and supply a fill panel for the soffit area underneath. Contact us with any questions and to request a quote for this model.

This greenhouse ships by truck. You are responsible for unloading. We will not order a power lift gate unless you agree to the additional charge. This is usually somewhere around $100.00.